B Low Noise in Silent Mode. Full-metal Linear Rails and Bearings. Vibration và Flow Rate Compensation.
American Express
Apple Pay
Diners Club
Discover
Meta Pay
Google Pay
Mastercard
Pay
Pal
Shop Pay
Venmo
Visa
Klarna
Bambu Lab A1 mini Combo
Multi-Color PrintingPlug-N-Play
Active Flow Rate Compensation
Full tự động Calibration
Active Motor Noise Cancelling
High speed Precision
Multi-Color Printing
The all-new AMS lite is elegant and reliable, making multi-color 3 chiều printing accessible to everyone.Bạn đang xem: Máy in 3d bambu lab a1
Active Flow Rate Compensation
The A1 mini revolutionizes flow control in 3 chiều printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to lớn extrude with accuracy.
Full auto Calibration
The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance & nozzle pressure for EVERY print job, automatically.
Plug-N-Play
The A1 mini comes to lớn you pre-assembled, pre-squared, và pre-tuned with precision. It only takes about trăng tròn minutes to set up for your first print.
Active Motor Noise Cancelling
The A1 mini can calibrate parameters to lớn match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Bed Slinger, with Core
XY Speed và Quality(High-Speed Precision)
Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, & above all, an advanced motion control system that utilizes these features lớn print a 14-minute benchy with unique and following all the speed benchy rules straight out of the box without using specialized filaments.
Sync with Bambu Studio & Bambu Handy
Remote control và monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.
Item | A1 mini Specification | |
Body | Build Volume(W*D*H) | 180*180*180 mm³ |
Toolhead | Hot End | All-Metal |
Nozzle | Stainless Steel | |
Max Hot over Temperature | 300 °C | |
Nozzle Diameter | 0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm | |
Heatbed | Build Plate | Bambu Textured PEI Plate (Included) Bambu Smooth PEI Plate |
Max Build Plate Temperature | 80°C | |
Speed | Max tốc độ of Tool Head | 500mm/s |
Max Acceleration of Tool Head | 10000mm/s² | |
Supported Filament | PLA, PETG, TPU, PVA | Ideal |
ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer | Not Recommended | |
Sensors | Monitoring Camera | Low Framerate Camera (Up to 1080P) Timelapse Supported |
Filament Run Out Sensor | Yes | |
Filament Odometry | Yes | |
Power Loss Recover | Yes | |
Filament Tangle Sensor | Yes | |
Physical Dimensions | A1 mini : 347*315*365 mm³ , Package form size : 385*430*460 mm³ , Net weight 5.5 kilogam , Gross weight 8.2 kilogam A1 mini full bộ : Package kích thước 385*430*495 mm³ , Gross weight (AMS lite included) 10.2 kg |
tải về A1 mini TDS
Full advanced features of A1 mini 3d printers : Learn more
Bambu Lab A1 mini Combo
What"s in the box
A1 mini
Spool Holder
Purge Wiper
Build Plate
PTFE Tube*1
Bambu Filament Samples (Random Color)
Stainless Steel Nozzle(Included)
Accessory Box
A1 mini combo Add-ons
AMS lite Stand
AMS lite Body
AMS lite Rotary Spool Holder (x4)
PTFE Tube*4
Frequently asked questions
1.What"s the difference between AMS & AMS lite? Does the AMS lite work with any Bambu printer or even other (brand) printers?
A: AMS is enclosed and the AMS lite is non-enclosed. AMS is incompatible with the A1 mini. If you want a multi-color print using A1 mini, you must use the AMS lite. AMS lite is incompatible with the X1 or P1 printer & other (brand) printers. If you want a multi-color print using an X1 or P1 printer, you must use AMS. For more details, please kiểm tra here.
2.What materials can the A1 mini print?
A: The A1 mini can print most of the materials on the market that don"t require an enclosure, such as PLA, PETG, TPU, and their tư vấn filament. It is not recommended lớn print filaments such as ABS, ASA, PC, PA,and PET that require higher bed & chamber temperatures.For more details, please kiểm tra here.
3.Will my order include the Mystery box components kit?
A: For Mystery box components kit, we have prepared a limited quantity of mystery box component kits for complimentary distribution lớn early purchasers of the A1 mini Combo. First come, first served. The Mystery box components kit cannot be returned or exchanged, nor can it be used as a reason for returning or exchanging the 3d printer.
4.What is the maximum print size of the A1 mini?
A: 180 * 180 *180 mm. For more product specifications , please refer lớn this page. For more details, please check here.
Auto Filament Loading
Full-Auto Calibration
Auto Bed-Level
Auto Z-Offset
Auto Vibration Calibration
Auto Flow Dynamics
Auto Belt Tension
Auto Filament Loading
Full-Auto Calibration
Goodbye khổng lồ Tedious Manual Calibration and Tuning
A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance và nozzle pressure for EVERY print job, automatically.
Goodbye to Tedious Manual Calibration and Tuning
A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
No More "Paper Method"
A1 probes the bed with the nozzle lớn measure the absolute Z-offset. No need khổng lồ stick a paper as reference.
Auto Tune Both X và Y Resonance Before Every Print
A1 has sensors in toolhead & heatbed. One of the very first bed-slinger printers to run auto resonance calibration on both X & Y axes.
Fully Automated page authority (Pressure Advanced) Calibration
First of its kind, A1 runs the nozzle pressure based flow dynamics calibration algorithm. No need to draw any pattern or get any manual pick & match involved, A1 handles Pressure Advanced calibration automatically.
Xem thêm: Mực in 673 chính hãng - mực in epson c13t673400
Auto Monitoring and Adjusting The Belts
A1 can kiểm tra the belt tension automatically through the vibration frequency calibration. If the belt tension is loose the HMS system will notify you to lớn adjust the auto belt tensioner.
Load/Unload Filament With One Touch
No manual setting involved, A1 fully automated the filament load/unload process.
AMS lite
Multi-Color Printing For Everyone
The all-new AMS lite is elegant & reliable, making multi-color 3d printing accessible khổng lồ everyone.
AMS lite
Multi-Color Printing For Everyone
The all-new AMS lite is elegant và reliable, making multi-color 3d printing accessible to everyone.
AMS lite
Multi-Color Printing For Everyone
The all-new AMS lite is elegant and reliable, making multi-color 3d printing accessible lớn everyone.
Active Flow Rate Compensation
Print Smooth At Every Corner, Always
The A1 revolutionizes flow control in 3 chiều printing. It utilizes a high-resolution, high-frequency eddy current sensor lớn measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according lớn the readings to extrude with accuracy.
High-speed Precision
Bed Slinger with Core
XY Speed and Quality
Full-metal Rails, Rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, và above all, an advanced motion control system that utilizes these features to lớn print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.
Intuitive UI
As Easy As Your Smart Phone
A1 now has a simplified touchscreen UI system that walks you through all the hurdles. You don't have khổng lồ be a 3 chiều printing expert lớn use the A1.
Worry-free Printing
Start & Relax
Bambu Lab printers are well known for the worry-free printing experience that has been widely praised by our fantastic userbase. Kiểm tra out what our users have lớn say about our printers on the market!
Well finally finished a larger print! Printed most of this one with the A1 mini since the P1P was turning into a P1S. Lol. Turned out awesome! Printed at a 100% & it’s pretty big! Printed amazing! Now I need a good shelf lớn display it!
The A1 Mini is an exceptional printer, very quiet, very good print quality. I have just printed the Bambu Lab Christmas Cabin on it, it took around 19 hours to lớn print on 9 plates và 3 hours khổng lồ glue it together, but it is very nice. Even the very small items stick very well to lớn the bed.
Well finally finished a larger print! Printed most of this one with the A1 mini since the P1P was turning into a P1S. Lol. Turned out awesome! Printed at a 100% and it’s pretty big! Printed amazing! Now I need a good shelf to display it!
The A1 Mini is an exceptional printer, very quiet, very good print quality. I have just printed the Bambu Lab Christmas Cabin on it, it took around 19 hours khổng lồ print on 9 plates và 3 hours lớn glue it together, but it is very nice. Even the very small items stick very well khổng lồ the bed.